Mittwoch, 30. April 2014

Literature 002: Niewoehner et al., Neuron, 2014, 81, 1, p49–60

A number of disorders affect the central nervous system (CNS) such as inflammations, viral infections, Alzheimer's disease, cancers, Parkinson's disease and many, *many* more. In case of Alzheimer, which currently is not curable, people who suffer from the disease are found to have what is called Amyloid-beta plaques in the brain, aggregates of some kind of protein. These aggregates negatively affect the brain function but can be removed if targeted with special antibodies such as Aducanumab, Bapineuzumab or Gantenerumab, possibly leading to a reversal of the disease.

The treatment of diseases of the CNS is difficult, because the body protects the CNS from the outside using a special kind of barrier. In the brain, this barrier is called blood-brain-barrier. The barrier in principle consists of special cells (brain-endothelial-cells, BECs/Endothelium in the figure below) which form the blood vessels and only permit certain substances to transpass from the vessel to the brain. For example, antibodies as those mentioned above are not as such allowed to pass the barrier.
http://clincancerres.aacrjournals.org/content/13/6/1663/F3.large.jpg
In the following, out of the shown possible passways, the focus is on (C), transferrin receptor mediated transcytosis. In this pathway, a substance first binds to the transferrin receptor (Tfr) and is then transported across the cell. This is where the research of Niewoehner et al. comes in. In short, they want to find a way of transporting an active substance such as one of the above mentioned antibodies to the brain.

In "Increased Brain Penetration and Potency ofa Therapeutic Antibody Using a Monovalent Molecular Shuttle", the researchers are able to do this by using a construct which consists of the therapeutically active antibody, a linker peptide and a Tfr active antibody fragment (Tabf). They test two versions of this construct, one with only one Tfr-active fragment, one with two such fragments. The control experiments are done using just the antibody without the linker unit or the Tfr active fragment.
http://www.cell.com/action/showImagesData?pii=S0896-6273%2813%2901035-0
Here, dFab stands for double-Fab and sFab for single-Fab. mAb31 is the monoclonal antibody 31.

In the following, the series of experiments is addressed by the questions they answer in order to establish a causal chain of reasoning.

1 Do the active parts of the construct interfere with their respective function?
http://www.cell.com/action/showImagesData?pii=S0896-6273%2813%2901035-0
In B, the solid and striped bars refer to two different coating densities used in the affinity experiment. As seen, the construct still can bind both ways (Abeta referes to Amyloid beta, the target protein aggregate). Notably, sFab and dFab have very similar binding affinity.

2 Does the construct enter the BEC?
Using a laser to highlight cells where the construct entered, the number of cells at a given fluorescence intensity are counted.
http://www.cell.com/cms/attachment/2012543313/2034747624/gr2.jpg
In red the cells with two Tabf's are counted, in green with only one. The black count corresponds to no Tabf. Apparently two Tabf's lead to a slightly better internalization of the construct.

3 What happens to the constructs (one or two Tabfs) once inside the cell?
http://www.cell.com/action/showImagesData?pii=S0896-6273%2813%2901035-0



One hour after exposure to the construct, it is measured how much of the construct is colocalized with the Lysosome associated membrane protein 2 (Lamp2). This gives an indication of where the construct is found in the cell.
The BECs have a mechanism to identify what has entered them. It is unclear how the cell identifies the dFab and moves it to the lysosome for digestion.


4 How can one be sure that the cell does not digest the sFab construct?
http://www.cell.com/action/showImagesData?pii=S0896-6273%2813%2901035-0
Red and pink are two different concentrations of dFab.
After having entered the cell, the construct has three possible ways to continue: 1) to cross the cell, 2) be digested by the cell and 3) exit the cell where it has entered (see also the first figure).
In the first case, this would mean that the overall number of receptors on the surface should remain constant and this is observed (green bars). The surface concentration of receptors associated with dFab however decreases over time, meaning they do not reappear at the surface once internalized. After 72 hours, apparently new Tfr's are expressed by the cell.

5 Do the constructs cross the cell?
An in vitro experiment is designed where a layer of human BECs separates two sections of liquid (the cells in the above experiments were from mice).
http://www.cell.com/action/showImagesData?pii=S0896-6273%2813%2901035-0
The construct is added to the Lumen compartment (model for the blood vessel inside) and allowed to enter the cells for 1 hour. Then both layers are washed, which controls for constructs entering the abluminal layer by channels inbetween the cells, and amount of construct over time in the two compartments is measured. sFab is observed to appear in both the abluminal and luminal part, while dFab is only found reappearing in the luminal part.

This is where I get confused.

The authors note that
EC50(sFab) = 3.8 nM
EC50(dFab) = 6.4 nM
but say "This suggests that the monovalent binding mode to the Tfr, and not just the reduced affinity, is the key factor for efficient transcytosis." (p. 51) If they are referring to the measured affinities for the construct towards mouse Tfr (see question 1 where dFab has 5.3-8.9 times higher affinity than sFab), then it makes sense. Otherwise I would have said that sFab has higher affinity than dFab based on these numbers.

One more aspect I find strange:
In my opinion, in (J), the yellow bars should also appear because the way it looks, it seems to indicate that the construct only returns to the lumen, i.e. it exits the cell only in one direction. Why should there be a preference for exiting the cell in only one direction?

Edit:
After discussing this issue with fellow collegues, the following explanation arose. The cell layer is incubated with sFab/dFab for one hour. Then both the luminal and abluminal compartments are flushed. Any sFab or dFab that appears in either compartment after that has to be coming from within the cells. Since the cargo enters the cell on one side, it has to travel a distance through the cell, but because this is a diffusion process, it has no preference as to what direction it takes. But because the cell has a sorting mechanism, the dFab cargo gets filtered out while it is crossing the cell. That's why no yellow bars appear for dFab. dFab however does also appear in the luminal side, that's because this distance is too short for the cell to sort it out before dFab can exit the cell again on the side it entered. That's also the reason why the luminal bars for sFab are slightly higher than for the abluminal side. The spatial distance within the cell simply requires more time to cross.

An in vivo image of the vessels after 15 min and 8 h of exposure to the construct shows what happens.
http://www.cell.com/action/showImagesData?pii=S0896-6273%2813%2901035-0
In the beginning, both constructs occupy the vessel cells (A, B). After 8 hours though, only sFab has crossed the vessel cells, i.e. they are not illuminating any longer (C), dFab has remained in the cells (D). In (C), the arrows point to accumulations of the construct on Amyloid-beta plaque aggregates.

6 Does the observed difference in BEC crossing between sFab and dFab depend on the rate at which they enter the BECs?
http://www.cell.com/action/showImagesData?pii=S0896-6273%2813%2901035-0
No.

7 Which construct binds more to Amyloid-beta plaque?
http://www.cell.com/action/showImagesData?pii=S0896-6273%2813%2901035-0
The measured increased plaque binding by sFab is therefore causal attributed to the fact that sFab binds to Tfr only by one Tabf.

8 Does sFab cover plaque faster than only mAb31 even at lower concentration?
http://www.cell.com/action/showImagesData?pii=S0896-6273%2813%2901035-0
Yes. The concentration of the antibody alone (light blue is 5 times higher than green) when not having a Tabf attached does not provide any activity. Duration of exposure does not change this, in other words the blood-brain-barrier remains closed no matter how high the concentration.

9 Is there a therapeutic effect of the construct?
Yes. The baseline shows the plaque number when the mice are 4.5 months old. Then, during 14 weeks, only the linker and the Tabf (vehicle), only the therapeutic antibody (mAb31) and the sFab are injected.
The plaque concentration increases in all mice, but when treated with sFab it increases at a lower rate.

10 Remarks
I would like to better understand the experiment from question 5. I  would expect that the next thing to do is to study dependence of therapeutic effect on amount of construct administered. What are the elimination rates of the construct? Interferences with other mechanisms? How stable is the construct? What is the exact nature of the cell sorting mechanism?
Also, in case you're interested, you can find the patent for this vehicle is WO 2014/033074.

A number of questions were raised during the discussion:
- If the cell sorting mechanism could be explained, maybe also dFab could be used as a carrier. It has some benefitial characteristics over sFab. Is this possible?
- If I was to manage this project, what would I do if it turns out that the shuttle is not linked strongly enough to the cargo, meaning it lets it's cargo go and picks up something, possibly toxic, else and carries it to the brain. I would say this shuttle is too important and therefore the engineering efforts have to be directed towards making the shuttle more strongly attached to the cargo.
- One short-coming of the study, in order to prove that it is not dependent on the type of cargo, is that no other cargo was used. This would have demonstrated independence of cargo nature. Of course, this would require a major additional effort.

Some out of context notes.
I was inspired to do this summary because I wanted to see how well I can understand and communicate a study from a totally different field. I believe it's important to be open to other fields and especially to be able to understand experimental approaches. Initially, the biology specific terms were difficult to understand but after a while I think I could identify the more important aspects.
Also, it seems sometimes that because of all the pharma-bashing, one doesn't notice that these guys actually do really amazing work.
Disclaimer: I have nothing to do with this research

2 Kommentare:

  1. Well frankly speaking, the results of the experiment that is crucial to asses the therapeutic potential (9) are not really striking. The amount of plaque found after 14 weeks is only approx. one third smaller (if at all: Hippocampus, 0.53 mg/kg) with sFab than with the vehicle (= no therapeutic effect expected). But from a pharmaceutical company perspective the results are probably nevertheless very promising: a slight positive impact on the course of a disease may lead to higher total revenues than an ideal cure!

    AntwortenLöschen
  2. Your first observation is definitely valid, however I dont think there can be ever a final answer to your second aspect. I would actually rather avoid wanting to speculate about if a pharmaceutical company wants to market an only halfway active treatment.
    Also, I guess the main focus of the work here is on the penetration of the blood-brain-barrier. Only now a pharmaceutically active substance can actually reach its full potential. Also, there were no attemps at optimizing dosage reported in this study, so I would guess that finding the optimal therapeutic window could be a future object of interest for these workers.

    AntwortenLöschen